Waste & Recycling Bins

• For  hinged door cabinets, for side wall and door mounting
• Can be mounted left or right handed
• Lid opens with opening of cabinet door
• Installed height x width x depth: 455 x 360 x 304 mm
• White with cream plastic mounting components,
• Light grey plastic inner bin included  
• Contents: approx. 15 litres

• For  hinged door cabinets, for side wall and door mounting
• Can be mounted left or right handed
• Lid opens with opening of cabinet door
• Installed height x width x depth: 455 x 360 x 304 mm
• Stainless steel housing with black plastic mounting components,
• Light grey plastic inner bin included   

If you have a fitted kitchen, you must make optimum use of the space available. Witness the Multi-Box 2x15. This can be used for low-level cupboards from as little as 30 cm wide. Simply assemble on the right, left or centrally as required. The two 15-litres inner bins sit in a rail to pull them out. Waste on the move: easy filling and removal of the inner bins guaranteed. And so that nothing can slip, the bin liner can be fixed to the edge of the bin.

Multi-Box 2x15: the practical built-in waste separator.

• Corrosion-resistant coated sheet steel housing
• Movable white plastic lid
• Can be used with carousel units from 30 cm wide
• Can be assembled on the right- or left-hand side or in the centre
• Bin liner can be fixed to the edge of the bin
• 2 removable inner bins (2x15 l): plastic, grey
• Size 262mm wide x 505mm deep x 425mm high

• For hinged door cabinets, floor mounted
• Designed to be withdrawn from the cabinet whilst the lid lifts and remains inside
• The bin housing incorporates its own runners and is secured to the cabinet floor
• The bin fits into a standard 300 mm wide cabinet
• Bin holder mounting components and runners: - Silver/grey powder coated steel
• Lid and bins Graphite grey (RAL7024) plastic
• Bins: 3 x 10 litres

• For hinged door cabinets
• Designed to be withdrawn from the cabinet whilst the lid remains in the cabinet
• The bin is mounted to the internal sides of the cabinet and incorporates its own runners
• The bin fits into a standard 300 mm wide cabinet
• Installed height x width x depth: 400 x 251 x 480 mm
• Bin holder and mounting components and runners: Silver/grey powder coated steel
• Lid and bins: Graphite grey (Ral 7024) plastic
• Capacity: 2 x 15 litres

• For hinged door cabinets
• Designed to be withdrawn from the cabinet whilst the lid remains in the cabinet
• The bin is mounted to the internal sides of the cabinet and incorporates its own runners
• The bin fits into a standard 300 mm wide cabinet
• Minimum installation depth 479 mm, minimum installation height 407 mm
• Bin holder and mounting components and runners: Silver/grey powder coated steel
• Lid and bins: Graphite grey (Ral 7024) plastic
• Capacity: 1 x 24 litres and 1 x 7 litre